Difference between revisions of "Longines Ultronic Diver"
From Chronopedia
ChronoAdmin (talk | contribs) (Created page with "==Longines Ultronic Diver Ref 8484== Longines were another watch maker that chose to use the ESA 9162 tuning fork movement in their watches. It was encased in a large steel c...") |
|||
| (5 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
| + | [[File:Longinesultronicdivergrey.jpg|thumb|Grey Bezel Longines 8484]] | ||
==Longines Ultronic Diver Ref 8484== | ==Longines Ultronic Diver Ref 8484== | ||
| + | [[File:Longines 8484 3 boxed.jpg|thumb]] | ||
| − | Longines were another watch maker that chose to use the ESA 9162 tuning fork movement in their watches. It was encased in a large steel case with screw back, rotating bezel and matching signed steel bracelet. No water depth rating is stated on the watch. Bezel is seen in Orange and Grey/Green | + | Longines were another watch maker that chose to use the ESA 9162 tuning fork movement in their watches. It was encased in a large steel case with screw back, rotating bezel and matching signed steel bracelet. |
| − | Width with crown 43.8 mm | + | * No water depth rating is stated on the watch. |
| − | Width without crown 41.0 mm - note crown is signed but not screwdown | + | * Bezel is seen in Orange/White and Grey/Green with matt black dial and silver markers. |
| − | Between lugs 22 mm | + | * Quickset date on this movement, renamed by Longines as a 6312. |
| − | Lug to lug length 44.9 mm | + | * Width with crown 43.8 mm |
| − | Case Thickness 13.3 mm | + | * Width without crown 41.0 mm - note crown is signed but not screwdown |
| + | * Between lugs 22 mm | ||
| + | * Lug to lug length 44.9 mm | ||
| + | * Case Thickness 13.3 mm | ||
[[File:Longinesultronicdiverorange.jpg|thumb|Orange 8484 Longines]] | [[File:Longinesultronicdiverorange.jpg|thumb|Orange 8484 Longines]] | ||
| + | |||
| + | ==Links== | ||
| + | * [[Longines]] | ||
| + | * [[Longines Ultronic]] | ||
Latest revision as of 00:20, 23 February 2021
Longines Ultronic Diver Ref 8484
Longines were another watch maker that chose to use the ESA 9162 tuning fork movement in their watches. It was encased in a large steel case with screw back, rotating bezel and matching signed steel bracelet.
- No water depth rating is stated on the watch.
- Bezel is seen in Orange/White and Grey/Green with matt black dial and silver markers.
- Quickset date on this movement, renamed by Longines as a 6312.
- Width with crown 43.8 mm
- Width without crown 41.0 mm - note crown is signed but not screwdown
- Between lugs 22 mm
- Lug to lug length 44.9 mm
- Case Thickness 13.3 mm
