ETA

From Chronopedia

ETA

Swiss movement manufacturer.

ETA SA Manufacture Horlogère Suisse (ETA SA Swiss Watch Manufacturer) designs and manufactures quartz watches and both hand-wound and automatic-winding mechanical ébauches and movements. Commonly referred to as ETA, the company is headquartered in Grenchen, Switzerland and is a wholly owned subsidiary of The Swatch Group. Though ETA was founded by Eterna in 1856 some part of its production line can be traced back to the 1793 founding of Fabriques d’Horlogerie de Fontainemelon (FHF) by David Benguerel, Isaac Benguerel, François Humbert-Droz and Julien Humbert-Droz.

Through a series of mergers, ETA has become the largest manufacturer of Swiss watch movements and controls a virtual monopoly over their production and supply. ETA has undergone several Swiss government investigations due to its market position. To resolve the concerns of Swiss government regulators, ETA has entered into an agreement that governs certain business practices.

History

ETA is the result of successive consolidation of the Swiss watch industry, a combination of several former Swiss watch movement manufacturers including Valjoux, Peseux[1][2] and Lemania. In 1856 at Grenchen, Urs Schild, a schoolmaster, and Dr. Girard set up a watch movement (ébauche) factory which eventually became Eterna. In 1926, ETA AS (the movement branch of Eterna, founded in 1896) and FHF (founded in 1793) took part in the creation of Ébauches Ltd. In 1978 AS and ETA merged and in 1985 ETA took in all the activities done before by Ébauches Ltd and FHF (both part of SMH/Swatch Group).[3] SSIH was founded in 1930 through the amalgamation of Omega and Tissot. By consolidating companies that produced high-quality movements and a number of watch brands, SSIH gradually established a strong position in the Swiss watch industry. At the time, both SSIH and ASUAG held a number of well-established Swiss watch brands. ASUAG had been founded in 1931. ASUAG expanded through the purchase of companies that made movement-blanks and a number of finished watch manufacturers that were subsequently brought together under the subsidiary General Watch Co (GWC). In the 1930s, both ASUAG and SSIH entered into complementary research and development programs to combat a severe economic crisis. Following repeated crises in the Swiss watch industry, by the 1970s both ASUAG and SSIH were again in trouble. Foreign competition and the mass production of cheap new electronic products were taking over the market. Eventually, both ASUAG and SSIH faced bankruptcy. During all those years of crisis, and restructuring, since 1978, Dr. Ernst Thomke had been at the helm of ETA SA, and also had become CEO of Ebauches SA and appointed on the Board of Directors of ASUAG. He became SMH's first CEO, position he held until 1991. At that time, Nicolas G. Hayek, as newly elected Chairman of the Board and main shareholder had already become the only person of reference. In 1998, Swiss Corporation for Microelectronics and Watchmaking Industries Ltd (Société de Microélectronique et d'Horlogerie or SMH), founded in 1983 through the merger Swiss watchmakers ASUAG and SSIH, was renamed the Swatch Group.

Notable Movements

ETA 2824-2

The workhorse of the ETA mechanical line is the ETA 2824-2, The 2824 is an automatic winding, twenty-five jewel movement, available in four executions or grades: Standard, Elaborated (improved), Top and Chronometer.[4] The key components which differ at the line of demarcation between Elaborated and Top are the shock protection system (Elaborate=Etachoc/Top=Incabloc), balance wheel (Elaborate=Brass/Top=Glucydur) and the hairspring (Elaborate=Nivaflex 2/Top=Anachron). In contrast, since the addition of the "-2" at the end of the movement number, there has been no difference between the standard and the chronometer grades in terms of the regulator mechanism, both being Etachron. To illustrate the differences in accuracy garnered by the successive grades, consider the following specifications:

  • Standard grade is adjusted in two positions with an average rate of +/−12 seconds/day, with a maximum daily variation of +/−30 seconds;
  • Elaborated grade is adjusted in three positions with an average rate of +/−7 seconds/day, with a maximum daily variation of +/−20 seconds;
  • Top grade is adjusted in five positions with an average rate of +/−4 seconds/day, with a maximum daily variation of +/−15 seconds.
  • The Chronometer grade must meet strict standards prescribed by the COSC. Chronometer grade movements are serial numbered, as that is a requirement of the certification authority. Moreover, the degree of decoration on the movement's parts, generally only an aesthetic improvement, increases as well with the grade.

ETA 2892

A newer design dating to the 1970s and fitted with top quality components. An automatic winding, twenty-one (21) jewel movement, the 2892 is available in three executions or grades: Elaborated, Top and Chronometer. The key components which differ at the line of demarcation between Elaborated and Top are the balance wheel (Elaborate=Brass/Top=Glucydur) and the hairspring (Elaborate=Nivaflex 2/Top=Anachron). In contrast, since the addition of the "-2" at the end of the movement number, there has been no difference between the standard and the chronometer grades in terms of the regulator mechanism, both being Etachron. The degree of decoration on the movement's parts also increases with the grade.

To illustrate the differences in accuracy garnered by the successive grades, consider the following specifications:

  • Elaborated grade is adjusted in four positions with an average rate of +/−5 seconds/day, with a maximum daily variation of +/−20 seconds;
  • Top grade is adjusted in five positions with an average rate of +/−4 seconds/day, with a maximum daily variation of +/−15 seconds.
  • Chronometer an average rate of −4/+6 with a maximum daily variation of +/−5 seconds - standards prescribed by the COSC. The wider range for the chronometer grade is designed to take into account the differences in a watch's rate between static positions, as when the tests are performed, and the dynamic positions as when a watch is actually worn. Chronometer grade movements are serial numbered.

The ETA 2892.A2 is usually found in the more expensive and prestigious watches and brands, and owing to its relatively slim height of 3.60 mm, the 2892.A2 is a favorite of watch brands that market complicated movements such as Breitling with its trademark chronograph (stop watches). The 2892 is also used in certain International Watch Company watches, including newer Ingenieur models introduced in 2013.

Valjoux 7750

The Valjoux 7750 a/k/a ETA 7750 an extremely popular movement used in the majority of mechanical chronograph watches on the market in 2004. The Valjoux 7750 uses a three-plane cam system, the coulisse-lever escapement, rather than the traditional chronograph mechanism, the column wheel. It is constructed of a mainplate, calendar plate, and chronograph top plate. Levers push a cam back and forth, driving the stopwatch mechanism of the Valjoux 7750. In the 1980s, many companies began using the Valjoux 7750 because it was easier to mass-produce and distribute in high-volume. The system and movement were developed by Edmond Capt in 1970, as a fully integrated self-winding mechanism with quick-set day/date based on the Valjoux 7733. The movement is an automatic winding, twenty-five (25) jewel movement, which can be fitted with a variety of features including the triple date (day, date, month and moon phase) or a variety of two and three register models with totalizers or counters for minutes, seconds and hours. It is available in three executions or grades: Elaborated, Top and Chronometer. The key components which differ at the line of demarcation between Elaborated and Top are the pallet stones, balance wheel & hairspring and the regulator mechanism. To illustrate the differences in accuracy garnered by the successive grades, consider the following specifications:

  • Elaborated grade is adjusted in three positions with an average rate of +/−5 seconds/day with a maximum daily variation of +/−15 seconds;
  • Top grade is adjusted in five positions with an average rate of +/−4 seconds/day with a maximum daily variation of +/−15 seconds.
  • Chronometer grade must meet strict standards prescribed by the COSC: an average rate of −4/+6 with a maximum daily variation of +/−5 seconds

Links

Other Links