Longines Ultronic Diver
From Chronopedia
Revision as of 22:22, 22 February 2021 by ChronoAdmin (talk | contribs) (Created page with "==Longines Ultronic Diver Ref 8484== Longines were another watch maker that chose to use the ESA 9162 tuning fork movement in their watches. It was encased in a large steel c...")
Longines Ultronic Diver Ref 8484
Longines were another watch maker that chose to use the ESA 9162 tuning fork movement in their watches. It was encased in a large steel case with screw back, rotating bezel and matching signed steel bracelet. No water depth rating is stated on the watch. Bezel is seen in Orange and Grey/Green Width with crown 43.8 mm Width without crown 41.0 mm - note crown is signed but not screwdown Between lugs 22 mm Lug to lug length 44.9 mm Case Thickness 13.3 mm
